ILCA (Laser)

300mm Sail Numbers to suit most Off The Beach Sailing boats and Trailer Sailors between 3.5m and 8.5m.   These include: ILCA 6 ILCA 7 Sharpies 505...

230mm Sail Numbers to suit most Off The Beach Sailing boats under 3.5m.   These include: Optimist ILCA 4   Colours include Blue, Red, Black (oth...

The cunningham plate, sits at the base of the mast and acts as turning point for the mainsheet and outhaul and cunningham ropes.*Not including blocks*

The clew strap is one of the most effective clew tie down system in use today. The easy to use velcro strapping technique provides the strength tha...

The 'self bailer' or 'venturi' is situated at the rear of the cockpit where it sucks water from the cockpit above a certain boat speed. This is the...

Commonly known as the bung, this is the screw in plug for the hole on the aft of the boat. Stamped with RWO it suits most of the newer Laser hull.

Moulded nylon wear protection pads for the ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protecto...

Fitted onto the top section of the mast to protect it from damage and set a maximum length at which it can slide into the bottom section. Suits all...

This fairlead is the aluminium version of the fairlead used on the stern of the boat to provide maximum turning points for the traveller. They are ...

New ILCA® Lower Vang Unit   FEATURES Lowest friction ILCA® vang unit available. HHL sheave for the high load primary sheave. Easy cleating and re...

ILCA / Laser Blue Mainsheet – 7mm diameter.   * Cut to 14.5m length suitable for ILCA mainsheets

Blended Dyneema and Polypropylene cover provides great abrasion resistance through ratchets and cleats. The Dyneema core means that you experience...

ILCA / Laser Yellow Mainsheet – 5.5mm diameter.   * Cut to 14.5m length suitable for ILCA mainsheets

Electronic compasses are now allowed in the ILCA class. The ILCA Carbon Parts compass bracket will allow you to add the popular Raymarine T060 micr...

Oceansouth Sailboat Covers tailor made design to fit ILCA Dinghies. Shock cord enclosed in hem and buckle fastening for perfect fit. Supplied with...

1 Remaining Ex-Charter ILCA boats are a great way to get into ILCA sailing or to upgrade that older boat. We have an Ex-Charter PSA boat used only ...

The Gold Standard in Single-handed sailing Laser sailing is an investment in skills that will last you a lifetime, skills that apply to any boat yo...

The Cam Cleat Plate is the base plate used to hold the cam cleats which cleat off the outhaul and cunningham ropes. It is situated in front of the ...

ILCA cam cleat plate complete with Harken Micro Carbon II cam cleats & Harken Micro Cam extreme fairleads and wire loops €“ comes assembled rea...

The Turbo pack is the necessity of all modern laser sailors. it increased the purchase on most control lines and provides efficient smooth blocks w...

The spar carrier is the most time efficient accessory you can invest in. They mean you no longer need to tie your spars down for travel and storage...

The Laser 4.7 uses short pre-bent lower mast to maintain a balanced helm and a sail area that is 35% smaller than the Laser Standard. It is ideal f...

The Premium hull cover is designed to keep your ILCA dinghy's hull protected when being transported and stored. Premium covers are manufactured wit...

The premium deck cover is designed to keep your ILCA deck and deck fittings away from the worst of the sun and weather. Premium covers are manufact...

The Laser Radial is a Laser with a smaller sail and a shorter mast. The bendy mast and radial cut sail allow you to go out in stronger winds and st...

The mainsheet block situated at the end of the rear of the boom.  Older non-bearing style. Order in item

The single pulley block, which is situated towards the forward end of the boom, feeds the mainsheet from the boom to the ratchet in the boat.   Old...

This block runs along the traveller at the rear of the boat and connects to the large traveller block giving the traveller it's functionality.   Ol...

The complete Cunningham Plate assembly is supplied with: ILCA Cunningham Plate; 2 x Ronstan Series 30 Orbit blocks; and 2 x wide 'D' shackles.

ILCA class approved vang system with Harken blocks. The complete set includes: 1 x ILCA vang block - built by Harken; 1 x 16 mm Harken single top b...

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

The PSA / Laser Foil Bag is a handy bag for carrying almost all of your laser equipment. It will fit the rudder, centreboard, tiller and tiller ext...

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

The outhaul sleeve is a metal clew tie down which fits around the boom and slides up and down, amazingly, with almost no friction and noise. The us...

The large block used for in the mainsheet system, which is connect to the traveller block.   Older non-bearing style. Order in item 

Facilitates the connection between boom and mast via the gooseneck while preventing wear on the boom and gooseneck.

ILCA approved block set produced by Harken. Set includes: traveller double block; boom beckett block; and single boom block

ILCA 7 Mk II (Laser Standard) class approved Dacron mainsail  Bi radial construction Larger window Optimized patching to eliminate creases and imp...

ILCA 6 / Laser Radial class approved Dacron mainsail:  includes folded sail bag; ILCA logo.   NB - Battens & sail numbers must be ordered sep...

ILCA 4 / Laser 4.7 class approved Dacron mainsail: includes folded bag; ILCA logo.   NB - Battens & sail numbers must be ordered separately.

Battens for ILCA sails. Models:ILCA 4 & 6 sail (Laser 4.7 & Radial) 2 large battens; 1 small batten; and includes batten ends. ILCA 7 MkI...

Black rubber plug for the self bailer (venturi). Has a hole Has a hole in the middle to push over the self bailer shaft.

Updated version - heavier gauge vang key now available. Attaches the upper pulley of the vang system to the boom.

The Grabrails are notably used to grab in instances of capsizes and rolling the boat. They are located on the upper sides of the cockpit walls. Sol...

Mainsheet Hanger - keeps mainsheet against the boom when tacking and jibing.

Fitted to the boom to hang the rear Mainsheet pulley

A metal fitting on the boom which connects the boom to the vang system.